Select: Part No.
1
Hose Type: Universal Hoses (UPE)
Product NameUniversal Hoses (UPE)
DescriptionUniversalschläuche nach EN 12115 für fast alle Chemie- und Mineralölprodukte, Lebensmittel und Kosmetika.
Innen: UPE
2
Hose Type: Type UTS – Universal Tank Hose (with steel helix)
Product NameType UTS
Part NumberUTS
Short DescriptionUniversal Tank Hose (with steel helix)
DescriptionBlue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.
ApplicationSuction and discharge hose for IBC's and barrels, rail tankers, tankers and fixed installations. The strong steel helix ensures that the hose maintains its shape during suction and gravity operations.
LiningUltra high molecular polyethylene UPE, white, with conductive OHM spiral stripe, smooth bore, abrasion resistant, no discoloration, conductive (Ω /T)
ReinforcementsThermoplast braids additionally with galvanised steel helix
CoverEPDM (EPT), black, conductive, resistant against weather and ageing, flame resistant
CertificatesDeclaration of conformity acc. to pressure equipment directive 2014/68/EU.
Manufacturer's declaration - absence of silicone.
MarkingBlue-white-blue bands every 0,5 mtr. and continuous embossing
Marking Sample

ELAFLEX UTS 50 · EN 12115 UPE · SD · Ω/T · UNIVERSAL · 100° C · 16 BAR ·  · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 19 to DN 150
Product Sheet
Page 121a-121b
PDF Certificates
Declaration of conformity
Manufacturer's declaration - absence of silicone
2
Size (ID): ID 125 mm (5")
Product NameID 125 mm (5")
Part Number125
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Fixed or swiveling flange
Product NameFlanges
Short DescriptionFixed or swiveling flange
5
Coupling 1: Flange
5
Coupling Type 1: SFC 125.150 St/St
Product NameSFC 125.150 St/St
Part NumberSFC 125.150 St/St/Al
DescriptionFlanged hose couplings acc. to EN 14420-4 with SPANNLOC bolted clamps of Aluminium.
Swivelling flange (lap joint flange).
Flanges according to EN 1092-1 or ASA (ANSI B 16.5).

Range of application: Hoses for petroleum based products, LP gas including ammonia, solvents, mud, water and air.
For chemicals, acids and alkalis take note of the resistance chart on page 250.

Not suitable for steam hoses.

Suitable for suction and pressure service according to the nominal pressure of the hose.
MaterialSwivelling flange (lap joint flange) and hose tail of steel zinc plated and chromated.
Product Sheet
Seite 273-274
5
Accessories 1: Without
5
Coupling Type 2: Second side without fittings
6
Coupling 2: Second side without fittings
6
Coupling Type 2:
6
Accessories 2:
6
Part No.
Request for Quotation



* required field




PDF-Documents

Note: Components not true to scale. Picture may differ from original product.

Part Number

UTS 125 L1=m SFC 125.150 St/St/Al ...

Hose TypeType UTS – Universal Tank Hose (with steel helix)
Product NameType UTS
Part NumberUTS
Short DescriptionUniversal Tank Hose (with steel helix)
DescriptionBlue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.
ApplicationSuction and discharge hose for IBC's and barrels, rail tankers, tankers and fixed installations. The strong steel helix ensures that the hose maintains its shape during suction and gravity operations.
LiningUltra high molecular polyethylene UPE, white, with conductive OHM spiral stripe, smooth bore, abrasion resistant, no discoloration, conductive (Ω /T)
ReinforcementsThermoplast braids additionally with galvanised steel helix
CoverEPDM (EPT), black, conductive, resistant against weather and ageing, flame resistant
CertificatesDeclaration of conformity acc. to pressure equipment directive 2014/68/EU.
Manufacturer's declaration - absence of silicone.
MarkingBlue-white-blue bands every 0,5 mtr. and continuous embossing
Marking Sample

ELAFLEX UTS 50 · EN 12115 UPE · SD · Ω/T · UNIVERSAL · 100° C · 16 BAR ·  · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 19 to DN 150
Product Sheet
Page 121a-121b
PDF Certificates
Declaration of conformity
Manufacturer's declaration - absence of silicone
Size (ID)ID 125 mm (5")
Product NameID 125 mm (5")
Part Number125
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One SideHose End Fitting Other Side
CouplingFlangeSecond side without fittings
Coupling TypeSFC 125.150 St/St
Product NameSFC 125.150 St/St
Part NumberSFC 125.150 St/St/Al
DescriptionFlanged hose couplings acc. to EN 14420-4 with SPANNLOC bolted clamps of Aluminium.
Swivelling flange (lap joint flange).
Flanges according to EN 1092-1 or ASA (ANSI B 16.5).

Range of application: Hoses for petroleum based products, LP gas including ammonia, solvents, mud, water and air.
For chemicals, acids and alkalis take note of the resistance chart on page 250.

Not suitable for steam hoses.

Suitable for suction and pressure service according to the nominal pressure of the hose.
MaterialSwivelling flange (lap joint flange) and hose tail of steel zinc plated and chromated.
Product Sheet
Seite 273-274
Coupling MaterialSteel Zn Cr Plated
Product NameSteel Zn Cr Plated
DescriptionSwivelling flange (lap joint flange) and hose tail of steel zinc plated and chromated.
ClampSPANNLOC
Product NameSPANNLOC
DescriptionSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

Clamp MaterialAluminium
Product NameAl
Short DescriptionAluminium
DescriptionStandard is hot stamped aluminium
AccessoriesWithout
Last Update: 21.02.2020