Select: Part No.
1
Hose Type: Universal Hoses (UPE)
Product NameUniversal Hoses (UPE)
DescriptionUniversalschläuche nach EN 12115 für fast alle Chemie- und Mineralölprodukte, Lebensmittel und Kosmetika.
Innen: UPE
2
Hose Type: Type UTS – Universal Tank Hose (with steel helix)
Product NameType UTS
Part NumberUTS
Short DescriptionUniversal Tank Hose (with steel helix)
DescriptionBlue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.
ApplicationSuction and discharge hose for IBC's and barrels, rail tankers, tankers and fixed installations. The strong steel helix ensures that the hose maintains its shape during suction and gravity operations.
LiningUltra high molecular polyethylene UPE, white, with conductive OHM spiral stripe, smooth bore, abrasion resistant, no discoloration, conductive (Ω /T)
ReinforcementsThermoplast braids additionally with galvanised steel helix
CoverEPDM (EPT), black, conductive, resistant against weather and ageing, flame resistant
CertificatesDeclaration of conformity acc. to pressure equipment directive 2014/68/EU.
Manufacturer's declaration - absence of silicone.
MarkingBlue-white-blue bands every 0,5 mtr. and continuous embossing
Marking Sample

ELAFLEX UTS 50 · EN 12115 UPE · SD · Ω/T · UNIVERSAL · 100° C · 16 BAR ·  · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 19 to DN 150
Product Sheet
Page 121a-121b
PDF Certificates
Declaration of conformity
Manufacturer's declaration - absence of silicone
2
Size (ID): ID 125 mm (5")
Product NameID 125 mm (5")
Part Number125
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Fixed or swiveling flange
Product NameFlanges
Short DescriptionFixed or swiveling flange
5
Coupling 1: Flange
5
Coupling Type 1: FFC 125.16 SSE
Product NameFFC 125.16 SSE
Part NumberFFC 125.16 SSE/Al
DescriptionFlanged hose couplings to EN 14420-4 with SPANNLOC safety clamps of Aluminium.
Fixed flange and hose tail.
Flanges to EN 1092-1 or ASA (ANSI B 16.5).

For chemicals, solvents, acids and alkalis (see resistance chart page 250).

This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability.

For suction and pressure service up to 25 bar working pressure.
MaterialFixed flange and hose tail of stainless steel AISI 316 Ti.
Surface in contact with the medium additionally coated with Teflon® PFA (corresponds to the FDA requirements).
Product Sheet
Seite 271-272
5
Accessories 1: Without
5
Coupling Type 2: Fixed or swiveling flange
Product NameFlanges
Short DescriptionFixed or swiveling flange
6
Coupling 2: Flange
6
Coupling Type 2: FFC 125.16 SSE
Product NameFFC 125.16 SSE
Part NumberFFC 125.16 SSE/Al
DescriptionFlanged hose couplings to EN 14420-4 with SPANNLOC safety clamps of Aluminium.
Fixed flange and hose tail.
Flanges to EN 1092-1 or ASA (ANSI B 16.5).

For chemicals, solvents, acids and alkalis (see resistance chart page 250).

This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability.

For suction and pressure service up to 25 bar working pressure.
MaterialFixed flange and hose tail of stainless steel AISI 316 Ti.
Surface in contact with the medium additionally coated with Teflon® PFA (corresponds to the FDA requirements).
Product Sheet
Seite 271-272
6
Accessories 2: Without
6
Part No.
Request for Quotation



* required field




PDF-Documents

Note: Components not true to scale. Picture may differ from original product.

Part Number

UTS 125 L1=m FFC 125.16 SSE/Al | FFC 125.16 SSE/Al ...

Hose TypeType UTS – Universal Tank Hose (with steel helix)
Product NameType UTS
Part NumberUTS
Short DescriptionUniversal Tank Hose (with steel helix)
DescriptionBlue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.
ApplicationSuction and discharge hose for IBC's and barrels, rail tankers, tankers and fixed installations. The strong steel helix ensures that the hose maintains its shape during suction and gravity operations.
LiningUltra high molecular polyethylene UPE, white, with conductive OHM spiral stripe, smooth bore, abrasion resistant, no discoloration, conductive (Ω /T)
ReinforcementsThermoplast braids additionally with galvanised steel helix
CoverEPDM (EPT), black, conductive, resistant against weather and ageing, flame resistant
CertificatesDeclaration of conformity acc. to pressure equipment directive 2014/68/EU.
Manufacturer's declaration - absence of silicone.
MarkingBlue-white-blue bands every 0,5 mtr. and continuous embossing
Marking Sample

ELAFLEX UTS 50 · EN 12115 UPE · SD · Ω/T · UNIVERSAL · 100° C · 16 BAR ·  · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 19 to DN 150
Product Sheet
Page 121a-121b
PDF Certificates
Declaration of conformity
Manufacturer's declaration - absence of silicone
Size (ID)ID 125 mm (5")
Product NameID 125 mm (5")
Part Number125
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One SideHose End Fitting Other Side
CouplingFlangeFlange
Coupling TypeFFC 125.16 SSE
Product NameFFC 125.16 SSE
Part NumberFFC 125.16 SSE/Al
DescriptionFlanged hose couplings to EN 14420-4 with SPANNLOC safety clamps of Aluminium.
Fixed flange and hose tail.
Flanges to EN 1092-1 or ASA (ANSI B 16.5).

For chemicals, solvents, acids and alkalis (see resistance chart page 250).

This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability.

For suction and pressure service up to 25 bar working pressure.
MaterialFixed flange and hose tail of stainless steel AISI 316 Ti.
Surface in contact with the medium additionally coated with Teflon® PFA (corresponds to the FDA requirements).
Product Sheet
Seite 271-272
FFC 125.16 SSE
Product NameFFC 125.16 SSE
Part NumberFFC 125.16 SSE/Al
DescriptionFlanged hose couplings to EN 14420-4 with SPANNLOC safety clamps of Aluminium.
Fixed flange and hose tail.
Flanges to EN 1092-1 or ASA (ANSI B 16.5).

For chemicals, solvents, acids and alkalis (see resistance chart page 250).

This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability.

For suction and pressure service up to 25 bar working pressure.
MaterialFixed flange and hose tail of stainless steel AISI 316 Ti.
Surface in contact with the medium additionally coated with Teflon® PFA (corresponds to the FDA requirements).
Product Sheet
Seite 271-272
Coupling MaterialStainless Steel PFA coating
Product NameStainless Steel PFA coating
DescriptionFixed flange and hose tail of stainless steel AISI 316 Ti.
Surface in contact with the medium additionally coated with Teflon® PFA (corresponds to the FDA requirements).
Stainless Steel PFA coating
Product NameStainless Steel PFA coating
DescriptionFixed flange and hose tail of stainless steel AISI 316 Ti.
Surface in contact with the medium additionally coated with Teflon® PFA (corresponds to the FDA requirements).
ClampSPANNLOC
Product NameSPANNLOC
DescriptionSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

SPANNLOC
Product NameSPANNLOC
DescriptionSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

Clamp MaterialAluminium
Product NameAl
Short DescriptionAluminium
DescriptionStandard is hot stamped aluminium
Aluminium
Product NameAl
Short DescriptionAluminium
DescriptionStandard is hot stamped aluminium
AccessoriesWithoutWithout
Last Update: 21.02.2020