Configurator Hose Assemblies

Select: Size (ID) (inner diameter)

Part Number


Hose TypeType PCS – Universal Hose 'POLYPAL CLEAN' (with steel helix)
Product NameType PCS
Part NumberPCS
Short DescriptionUniversal Hose 'POLYPAL CLEAN' (with steel helix)
DescriptionUniversal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.
ApplicationSuction and discharge hose for barrels, containers, tanks and fixed installations. The steel helix ensures that the hose maintains its shape during suction and gravity operations.
POLYPAL CLEAN is universally suitable for most liquids, high viscous and powdery media, except of brome, brominated hydrocarbons, chlorine, chlorosulfonic acid, fluorine and strongly oxidising acids such as concentrated nitric acid, smoking sulfuric acid (oleum).
For details see chemical resistance chart.

The hose proved that critical mediums such as toluene and acetone show no perceptible discolouring of the conveyed product, even in wet hose conditions.

Cover: Clean surfaces due to scuff-proof light grey rubber.
Lining: The smooth UPE lining allows good drainage and easy cleaning when changing medium.
UPE is resistant against all commercial cleaning agents up to +100° Celsius. The 'open' steaming out and sterilisation is possible with saturated steam up to +130° Celsius for max. 30 minutes. Do not use steam nozzles which can destroy the lining by localised overheating.
LiningUPE bright, with OHM conductive stripe, smooth, no discolouration, abrasion resistant, electrically conductive
ReinforcementsTextile braids additionally with galvanised steel helix
CoverEPDM, electrically conductive, light-grey with OHM conductive stripe, ozone-, UV and flame-resistant
CertificatesUPE lining conform to FDA and USP Class VI. The material fulfills regulations EC 1935/2004 and EC 10/2011. Confirmation of mentioned electrostatic properties by PTB and ZAFT, certificate No. ZAFT Ex 209906-9.
Manufacturer declaration - absence of silicone.
MarkingBlue-white-blue coloured spiral and abrasion resistant continuous embossing
Marking Sample

ELAFLEX PCS 50 POLYPAL CLEAN · EN 12115 · UPE · SD · Ω/T · 100ºC · 16 BAR · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 121c-121d
Page PAL 03-04
PDF Certificates
Manufacturer declaration - absence of silicone
Click to Compare
Your choice:
Choose additional options
or click here to go on.
Last Update: 07.06.2019