Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select: Length (L1)
1
Hose Type: Special Hoses
Product NameSpecial Hoses
DescriptionSpecial hoses for foodstuffs, ammoniac, hot air, cement, hot asphalt, steam and hot water.
2
Hose Type: Type HB – Hose for Hot Asphalt (with steel helix)
Product NameType HB
Part NumberHB
Short DescriptionHose for Hot Asphalt (with steel helix)
DescriptionHot Bitumen hose 'Brown Band', for filling of hot bitumen and heavy fuel oil.
Temperature range -25° C to max. +200° C.
Not suitable for lignite-tar oil and coal-tar oils.
Meets EN 13482.
CommentPLEASE NOTE:
Hot bitumen is dangerous! The safety hints see overleaf, have to be strictly observed.
HB hoses are designed for a nominal pressure of 10 bar and a burst pressure of min. 40 bar at +20° C. Working pressure of 7 bar is allowed for service with hot products up to +200° C / +392° F.
Pressure test (55 min/15 bar) upon request against surcharge.Conductivity:
To ensure a safe electrical conductivity of the hose assemblies the steel helix has to be securely fixed to the hose tails at both Ends.
LiningSpecial elastomer, seamless
ReinforcementsTwo textile braids with tinned copper strands and embedded steel helix, zinc plated
CoverSpecial elastomer, electrically conductive
MarkingBrown bands every 2,5 mtr. and continous vulcanised embossing
Marking Sample

HB 50 · EN 13482 · ASPHALT - BITUMEN · TYPE 1 SB / B · PN 7 BAR · 200° C · ELAFLEX 1Q-16

SizeDN 50 to DN 100
Product Sheet
Page 135-136
2
Size (ID): ID 75 mm (3")
Product NameID 75 mm (3")
Part Number75
3
Length (L1)
max. reel length = 40 m (131.2 feet)
unit
,
metrescentimetres
4Coupling Type 1
5Coupling Type 2
6Part No.
0,00 m

Part Number

HB 75...

Hose TypeType HB – Hose for Hot Asphalt (with steel helix)
Product NameType HB
Part NumberHB
Short DescriptionHose for Hot Asphalt (with steel helix)
DescriptionHot Bitumen hose 'Brown Band', for filling of hot bitumen and heavy fuel oil.
Temperature range -25° C to max. +200° C.
Not suitable for lignite-tar oil and coal-tar oils.
Meets EN 13482.
CommentPLEASE NOTE:
Hot bitumen is dangerous! The safety hints see overleaf, have to be strictly observed.
HB hoses are designed for a nominal pressure of 10 bar and a burst pressure of min. 40 bar at +20° C. Working pressure of 7 bar is allowed for service with hot products up to +200° C / +392° F.
Pressure test (55 min/15 bar) upon request against surcharge.Conductivity:
To ensure a safe electrical conductivity of the hose assemblies the steel helix has to be securely fixed to the hose tails at both Ends.
LiningSpecial elastomer, seamless
ReinforcementsTwo textile braids with tinned copper strands and embedded steel helix, zinc plated
CoverSpecial elastomer, electrically conductive
MarkingBrown bands every 2,5 mtr. and continous vulcanised embossing
Marking Sample

HB 50 · EN 13482 · ASPHALT - BITUMEN · TYPE 1 SB / B · PN 7 BAR · 200° C · ELAFLEX 1Q-16

SizeDN 50 to DN 100
Product Sheet
Page 135-136
Size (ID)ID 75 mm (3")
Product NameID 75 mm (3")
Part Number75
Last Update: 14.11.2019