Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select hose side 1: Coupling (Flange)
Form S (swiveling flange)swiveling flange

Form F (fixed flange)fixed flange
DIN PN 40
(PN 10, 16, 25, 40)
DIN PN 40 (PN 10, 16, 25, 40)
Steel Zn Cr PlatedSt

Stainless SteelSS

Stainless Steel PFA coatingSSE
Stainless steel, but parts in contact with liquid with an additional coating of Teflon® (FDA approved).
The PFA coating is used when the chemical resistance of stainlees steel is not sufficient like for hydrochloric acid, ferro-III-chloride, diluted sulfuric acid.
Steel Zn Cr PlatedSt

Stainless SteelSS
SPANNFIXSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.


SPANNLOCSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

AluminiumStandard is hot stamped aluminium
chosen option
selectable
non selectable
Matrix
5Coupling Type 2
6Part No.

Part Number

XHD 40 L1=m...

Hose TypeType XHD – Fuel Oil Reel Hose (without helix)
Product NameType XHD
Part NumberXHD
Short DescriptionFuel Oil Reel Hose (without helix)
DescriptionEconomy fuel oil reel hose without helix for petroleum based products. Temperature range -30° up to +70° C. Electrical conductivity <106 Ohm.
CommentSimplified version of hose type HD. The high quality standards of the German Military Standard are not met in all respects by this Economy type, e.g. cold flexibility, non-discolouration of the medium as well as the resistance to abrasion and weathering.
LiningNitrile rubber (NBR), black, electrically dissipative
ReinforcementsTwo low tensile textile braids
CoverCR, black, abrasion resistant, el. conductive
CertificatesDNV • GL - type examination certificate for fuelling hoses.
MarkingContinuous, vulcanised embossing without coloured bands
Marking Sample

ELAFLEX XHD 50 · EN 1761 · D · HEIZÖL-DIESEL-FUEL OIL · ECONOMY · Ω · PN 25 BAR · · ContiTech · MADE IN GERMANY · (Batch No.) · 3Q-16

SizeDN 25 to DN 75
Product Sheet
Page 103-104
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 40 mm
Product NameID 40 mm
Part Number40
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingFlange
Please Note:
For the correct choice of coupling and sealing materials please refer to our
Chemical Resistance Chart Fittings and Chemical Resistance Seals.

If in doubt, please contact our sales team.
Click to Compare
Last Update: 12.12.2019