Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select: Coupling Type 1 hose side 1: Coupling
1
Hose Type: Hose Selection Guide
2
Hose Type: Type PCS – Universal Hose 'POLYPAL CLEAN' (with steel helix)
Product NameType PCS
Part NumberPCS
Short DescriptionUniversal Hose 'POLYPAL CLEAN' (with steel helix)
DescriptionUniversal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.
ApplicationSuction and discharge hose for barrels, containers, tanks and fixed installations. The steel helix ensures that the hose maintains its shape during suction and gravity operations.
CommentCHEMICAL RESISTANCE
POLYPAL CLEAN is universally suitable for most liquids, high viscous and powdery media, except of brome, brominated hydrocarbons, chlorine, chlorosulfonic acid, fluorine and strongly oxidising acids such as concentrated nitric acid, smoking sulfuric acid (oleum).
For details see chemical resistance chart.

DISCOLOURING
The hose proved that critical mediums such as toluene and acetone show no perceptible discolouring of the conveyed product, even in wet hose conditions.

CLEANING AND TEMPERATURE RESISTANCE
Cover: Clean surfaces due to scuff-proof light grey rubber.
Lining: The smooth UPE lining allows good drainage and easy cleaning when changing medium.
UPE is resistant against all commercial cleaning agents up to +100° Celsius. The 'open' steaming out and sterilisation is possible with saturated steam up to +130° Celsius for max. 30 minutes. Do not use steam nozzles which can destroy the lining by localised overheating.
LiningUPE bright, with OHM conductive stripe, smooth, no discolouration, abrasion resistant, electrically conductive. FDA conform *)
ReinforcementsTextile braids, form SD additionally with galvanised steel helix
CoverEPDM light grey with OHM conductive stripe, electrically conductive. FDA conform *)
CertificatesUPE lining and all layers of rubber conform to FDA and regulations (EC) No. 1935/2004;
Material of lining to (EU) No. 10/2011. All layers of rubber correspond to Recommendation XXI of BfR.
Confirmation of mentioned electrostatic properties by ZAFT, certificate No. ZAFT Ex 209906-9.
Manufacturer declaration - absence of silicone.
**) Lining and cover corresponds to FDA guideline 21 CFR 177.1550 and CFR 178.3297 and fulfills the requirements of EU regulations No. 1935/2004 and No. 10/2011.
MarkingBlue-white-blue coloured spiral and abrasion resistant continuous embossing
Marking Sample

ELAFLEX PCS 50 POLYPAL CLEAN · EN 12115 · UPE · SD · Ω/T · 100ºC · 16 BAR · · MADE IN GERMANY · · 1Q-20

SizeDN 25 to DN 100
Product Sheet
Page 121c-121d
Page PAL 03-04
PDF Certificates
Manufacturer declaration - absence of silicone
2
Size (ID): ID 25 mm (1")
Product NameID 25 mm (1")
Part Number25
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1
5Coupling Type 2
6Part No.

Part Number

PCS 25 L1=m...

Hose TypeType PCS – Universal Hose 'POLYPAL CLEAN' (with steel helix)
Product NameType PCS
Part NumberPCS
Short DescriptionUniversal Hose 'POLYPAL CLEAN' (with steel helix)
DescriptionUniversal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.
ApplicationSuction and discharge hose for barrels, containers, tanks and fixed installations. The steel helix ensures that the hose maintains its shape during suction and gravity operations.
CommentCHEMICAL RESISTANCE
POLYPAL CLEAN is universally suitable for most liquids, high viscous and powdery media, except of brome, brominated hydrocarbons, chlorine, chlorosulfonic acid, fluorine and strongly oxidising acids such as concentrated nitric acid, smoking sulfuric acid (oleum).
For details see chemical resistance chart.

DISCOLOURING
The hose proved that critical mediums such as toluene and acetone show no perceptible discolouring of the conveyed product, even in wet hose conditions.

CLEANING AND TEMPERATURE RESISTANCE
Cover: Clean surfaces due to scuff-proof light grey rubber.
Lining: The smooth UPE lining allows good drainage and easy cleaning when changing medium.
UPE is resistant against all commercial cleaning agents up to +100° Celsius. The 'open' steaming out and sterilisation is possible with saturated steam up to +130° Celsius for max. 30 minutes. Do not use steam nozzles which can destroy the lining by localised overheating.
LiningUPE bright, with OHM conductive stripe, smooth, no discolouration, abrasion resistant, electrically conductive. FDA conform *)
ReinforcementsTextile braids, form SD additionally with galvanised steel helix
CoverEPDM light grey with OHM conductive stripe, electrically conductive. FDA conform *)
CertificatesUPE lining and all layers of rubber conform to FDA and regulations (EC) No. 1935/2004;
Material of lining to (EU) No. 10/2011. All layers of rubber correspond to Recommendation XXI of BfR.
Confirmation of mentioned electrostatic properties by ZAFT, certificate No. ZAFT Ex 209906-9.
Manufacturer declaration - absence of silicone.
**) Lining and cover corresponds to FDA guideline 21 CFR 177.1550 and CFR 178.3297 and fulfills the requirements of EU regulations No. 1935/2004 and No. 10/2011.
MarkingBlue-white-blue coloured spiral and abrasion resistant continuous embossing
Marking Sample

ELAFLEX PCS 50 POLYPAL CLEAN · EN 12115 · UPE · SD · Ω/T · 100ºC · 16 BAR · · MADE IN GERMANY · · 1Q-20

SizeDN 25 to DN 100
Product Sheet
Page 121c-121d
Page PAL 03-04
PDF Certificates
Manufacturer declaration - absence of silicone
Size (ID)ID 25 mm (1")
Product NameID 25 mm (1")
Part Number25
Length (L1)next m (Length Between Sealing Surfaces)
Last Update: 27.03.2020