Configurator Hose Assemblies

Home
DE | EN
Select: Size (ID) (inner diameter)

Part Number

PCD

Hose TypeType PCD
Product NameType PCD
Part NumberPCD
Short DescriptionUniversal Hose 'POLYPAL CLEAN' (without helix)
DescriptionUniversal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.
ApplicationAs pressure hose for discharge in wet and dry hose systems. Also suitable as reel hose provided the inner pressure reaches min. 0,5 bar to avoid kinking.
CommentCHEMICAL RESISTANCE
POLYPAL CLEAN is universally suitable for most liquids, high viscous and powdery media, except of brome, brominated hydrocarbons, chlorine, chlorosulfonic acid, fluorine and strongly oxidising acids such as concentrated nitric acid, smoking sulfuric acid (oleum). For details see chemical resistance chart.

DISCOLOURING
The hose proved that critical mediums such as toluene and acetone show no perceptible discolouring of the conveyed product, even in wet hose conditions.

CLEANING AND TEMPERATURE RESISTANCE
Cover: Clean surfaces due to scuff-proof light grey rubber.
Lining: The smooth UPE lining allows good drainage and easy cleaning when changing medium.
UPE is resistant against all commercial cleaning agents up to +100° Celsius. The 'open' steaming out and sterilisation is possible with saturated steam up to +130° Celsius for max. 30 minutes. Do not use steam nozzles which can destroy the lining by localised overheating.
LiningUPE bright, with OHM conductive stripe, smooth, no discolouration, abrasion resistant, electrically conductive
ReinforcementsTextile braids
CoverEPDM, electrically conductive, light-grey with OHM conductive stripe, ozone-, UV and flame-resistant
CertificatesUPE lining conform to FDA and USP Class VI. The material fulfills regulations EC 1935/2004 and EC 10/2011. Confirmation of mentioned electrostatic properties by PTB and ZAFT, certificate No. ZAFT Ex 209906-9.
Manufacturer declaration - absence of silicone.
MarkingBlue-white-blue coloured spiral and abrasion resistant continuous embossing
Kennzeichnungsbeispiel

ELAFLEX PCD 25 · POLYPAL CLEAN · EN 12115 · UPE · D · Ω/T · 100ºC · 16 BAR ·  · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 13 to DN 38
Product Sheet
Page 121c-121d
Page PAL 03-04
PDF Certificates
Manufacturer declaration - absence of silicone
Click to Compare
Your choice:
Choose additional options
or click here to go on.
Last Update: 13.12.2018