Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select hose side 1: Coupling (Threaded Couplings)
1
Hose Type: Hose Selection Guide
2
Hose Type: Type HD – High Pressure Fuelling Hose (without helix)
Product NameType HD
Part NumberHD
Short DescriptionHigh Pressure Fuelling Hose (without helix)
Description'Yellow Band' high pressure fuelling hose without helix for reel operation. Ideal for all petroleum based products. Temperature range -30° up to +90° C (temporarily up to +110° C). Electrical conductivity <106 Ohm. Corresponds to EN 1761. Can be calibrated according to European regulations. Approved acc. to German military standard VG 95 955 Typ D. Corresponds to EN 12115.
CommentThe lining is resistant to swelling, solubility and discolouration. It is flexible at low temperatures. The cover is resistant to abrasion and weathering and furthermore provides a very good low temperature flexibility. Meets the material group NBR 1 of the EN 12115.

Please note: When used for suction the distance between the pipe ends must not be larger than the inner diameter. Hose clamps type SK see catalogue page 291.
LiningNitrile rubber (NBR) black, no fuel-solubility
ReinforcementsTwo low tensile textile braids for extreme low volume increase under pressure
CoverChloroprene (CR), black, conductive
CertificatesDNV • GL - type examination certificate for fuelling hoses.
MarkingYellow bands every 4 mtr. and continuous, vulcanised embossing.
Please note: Marking of HD 10 with longitudinal yellow stripe.
Marking Sample

ELAFLEX HD 40 · MINERALOELPRODUKTE · 90° C · PETROLEUM PRODUCTS · EN 1761 · Ω · 25 BAR · · ContiTech · MADE IN GERMANY · (Batch No.) · 3Q-16

SizeDN 10 to DN 100
Product Sheet
Page 103-104
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 100 mm (4") LT (Low Temperature)
Product NameID 100 mm (4") LT (Low Temperature)
Part Number100 LT
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Female / Male couplings
Product NameThreaded Couplings
Short DescriptionFemale / Male couplings
5
Coupling 1: Threaded Couplings
5
Coupling Type 1
BSPAccording to EN ISO 228 / BSP parallel.

NPTANSI B 1.20.1
Tapered pipe thread, thread seling e.g. with PTFE tape, therefore not available with swiveling nut, only as fixed female thread.

RD 130 X 1/4Hose couplings with special thread to DIN 11851 for foodstuffs.
BrassMs

AluminiumAl

L-TYPEHose tail aluminium, union nut of brass

Steel Zn Cr PlatedSt

Stainless SteelSS
SPANNFIXSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.


SPANNLOCSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

AluminiumStandard is hot stamped aluminium

Stainless Steelstainless steel
PTFEshort name: TD
white, solid, hard, glass fibre reinforced

Polyurethaneshort name: VD
Highly resistant to abrasion, non-toxic. Shore hardness = 90° C.
For all petroleum based products and many solvents as per resistance chart on page 396.

CSMShort name: HyD
soft, for acids and alkalis

EPDMshort name: EPD
black, soft, for esters and ketones, ether, acetates, alkohols, aldehydes

FKMshort name: ViD
soft, for aromatic hydrocarbons and hot oils

Thermopacshort name: HBD
light colour, hard
Especially for hot oils and hot bitumen up to 250° C and for hot water and saturated steam up to 25 bar.
NBR blueshort name: NBR
blue, for mineral oil products

FKMshort name: Vi
black, for aromatics and hot oils
chosen option
selectable
non selectable
Matrix
5Coupling Type 2
6Part No.

Part Number

HD 100 LT L1=m...

Hose TypeType HD – High Pressure Fuelling Hose (without helix)
Product NameType HD
Part NumberHD
Short DescriptionHigh Pressure Fuelling Hose (without helix)
Description'Yellow Band' high pressure fuelling hose without helix for reel operation. Ideal for all petroleum based products. Temperature range -30° up to +90° C (temporarily up to +110° C). Electrical conductivity <106 Ohm. Corresponds to EN 1761. Can be calibrated according to European regulations. Approved acc. to German military standard VG 95 955 Typ D. Corresponds to EN 12115.
CommentThe lining is resistant to swelling, solubility and discolouration. It is flexible at low temperatures. The cover is resistant to abrasion and weathering and furthermore provides a very good low temperature flexibility. Meets the material group NBR 1 of the EN 12115.

Please note: When used for suction the distance between the pipe ends must not be larger than the inner diameter. Hose clamps type SK see catalogue page 291.
LiningNitrile rubber (NBR) black, no fuel-solubility
ReinforcementsTwo low tensile textile braids for extreme low volume increase under pressure
CoverChloroprene (CR), black, conductive
CertificatesDNV • GL - type examination certificate for fuelling hoses.
MarkingYellow bands every 4 mtr. and continuous, vulcanised embossing.
Please note: Marking of HD 10 with longitudinal yellow stripe.
Marking Sample

ELAFLEX HD 40 · MINERALOELPRODUKTE · 90° C · PETROLEUM PRODUCTS · EN 1761 · Ω · 25 BAR · · ContiTech · MADE IN GERMANY · (Batch No.) · 3Q-16

SizeDN 10 to DN 100
Product Sheet
Page 103-104
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 100 mm (4") LT (Low Temperature)
Product NameID 100 mm (4") LT (Low Temperature)
Part Number100 LT
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingThreaded Couplings
Please Note:
For the correct choice of coupling and sealing materials please refer to our
Chemical Resistance Chart Fittings and Chemical Resistance Seals.

If in doubt, please contact our sales team.
Click to Compare
Last Update: 12.12.2019