Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select: Coupling Type 1 hose side 1: Coupling
1
Hose Type: Hose Selection Guide
2
Hose Type: Type HD – High Pressure Fuelling Hose (without helix)
Product NameType HD
Part NumberHD
Short DescriptionHigh Pressure Fuelling Hose (without helix)
Description'Yellow Band' high pressure fuelling hose without helix for reel operation. Ideal for all petroleum based products. Temperature range -30° up to +90° C (temporarily up to +110° C). Electrical conductivity <106 Ohm. Corresponds to EN 1761. Can be calibrated according to European regulations. Approved acc. to German military standard VG 95 955 Typ D. Corresponds to EN 12115.
CommentThe lining is resistant to swelling, solubility and discolouration. It is flexible at low temperatures. The cover is resistant to abrasion and weathering and furthermore provides a very good low temperature flexibility. Meets the material group NBR 1 of the EN 12115.

Please note: When used for suction the distance between the pipe ends must not be larger than the inner diameter. Hose clamps type SK see catalogue page 291.
LiningNitrile rubber (NBR) black, no fuel-solubility
ReinforcementsTwo low tensile textile braids for extreme low volume increase under pressure
CoverChloroprene (CR), black, conductive
CertificatesDNV • GL - type examination certificate for fuelling hoses.
MarkingYellow bands every 4 mtr. and continuous, vulcanised embossing.
Please note: Marking of HD 10 with longitudinal yellow stripe.
Marking Sample

ELAFLEX HD 40 · MINERALOELPRODUKTE · 90° C · PETROLEUM PRODUCTS · EN 1761 · Ω · 25 BAR · · ContiTech · MADE IN GERMANY · (Batch No.) · 3Q-16

SizeDN 10 to DN 100
Product Sheet
Page 103-104
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 100 mm (4") LT (Low Temperature)
Product NameID 100 mm (4") LT (Low Temperature)
Part Number100 LT
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1
5Coupling Type 2
6Part No.

Part Number

HD 100 LT L1=m...

Hose TypeType HD – High Pressure Fuelling Hose (without helix)
Product NameType HD
Part NumberHD
Short DescriptionHigh Pressure Fuelling Hose (without helix)
Description'Yellow Band' high pressure fuelling hose without helix for reel operation. Ideal for all petroleum based products. Temperature range -30° up to +90° C (temporarily up to +110° C). Electrical conductivity <106 Ohm. Corresponds to EN 1761. Can be calibrated according to European regulations. Approved acc. to German military standard VG 95 955 Typ D. Corresponds to EN 12115.
CommentThe lining is resistant to swelling, solubility and discolouration. It is flexible at low temperatures. The cover is resistant to abrasion and weathering and furthermore provides a very good low temperature flexibility. Meets the material group NBR 1 of the EN 12115.

Please note: When used for suction the distance between the pipe ends must not be larger than the inner diameter. Hose clamps type SK see catalogue page 291.
LiningNitrile rubber (NBR) black, no fuel-solubility
ReinforcementsTwo low tensile textile braids for extreme low volume increase under pressure
CoverChloroprene (CR), black, conductive
CertificatesDNV • GL - type examination certificate for fuelling hoses.
MarkingYellow bands every 4 mtr. and continuous, vulcanised embossing.
Please note: Marking of HD 10 with longitudinal yellow stripe.
Marking Sample

ELAFLEX HD 40 · MINERALOELPRODUKTE · 90° C · PETROLEUM PRODUCTS · EN 1761 · Ω · 25 BAR · · ContiTech · MADE IN GERMANY · (Batch No.) · 3Q-16

SizeDN 10 to DN 100
Product Sheet
Page 103-104
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 100 mm (4") LT (Low Temperature)
Product NameID 100 mm (4") LT (Low Temperature)
Part Number100 LT
Length (L1)next m (Length Between Sealing Surfaces)
Last Update: 12.12.2019