Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select hose side 1: Coupling (Flange)
1
Hose Type: Hose Selection Guide
2
Hose Type: Type HD-C – Aircraft Refueling Hose (without helix)
Product NameType HD-C
Part NumberHD-C
Short DescriptionAircraft Refueling Hose (without helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationHydrant inlet and into-plane hose. Up to size 2½" as deck hose. The hose does not kink with a permanent pressure of least 0,5 bar.
CommentSpecification: Meets Standard EN ISO 1825 (EN 1361), EI 1529 C, NFPA 407 and AS 2683. Approved acc. to German military standard VG 95 955. Specified by almost all major oil companies. Standard type 'HD-C' with two textile braids. Light weight, flexible hose for pressure service. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow bands every 4 mtr. and continuous embossing
Please note: Marking of HD 10 C with longitudinal yellow stripe.
Marking Sample

ELAFLEX HD 100 C · EN ISO 1825 C · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 10 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 32 mm (1¼") NEON
Product NameID 32 mm (1¼") NEON
Part Number32 NEON
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Fixed or swiveling flange
Product NameFlanges
Short DescriptionFixed or swiveling flange
5
Coupling 1: Flange
5
Coupling Type 1
Form S (swiveling flange)swiveling flange

Form F (fixed flange)fixed flange
DIN PN 40
(PN 25, 40)
DIN PN 40 (PN 25, 40)

DIN PN 40
(PN 10, 16, 25, 40)
DIN PN 40 (PN 10, 16, 25, 40)

ASA 150ANSI B 16.5 150 lb/sq. in

ASA 300ANSI B 16.5 300 lb/sq. in
Stainless SteelSS
Steel Zn Cr PlatedSt

Stainless SteelSS
SPANNFIXSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.


SPANNFIX N-RSPANNFIX N-R (non reattachable) works to the same principle as the SPANNFIX but cannot be disassembled without destroying the clamp.
Hose assemblies should be mounted only by experienced staff in the factory. Approved as equivalent to swaged-on and machine-fitted couplings.

SPANNLOCSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

AluminiumStandard is hot stamped aluminium

Stainless Steelstainless steel
chosen option
selectable
non selectable
Matrix
5Coupling Type 2
6Part No.

Part Number

HD-C 32 NEON L1=m...

Hose TypeType HD-C – Aircraft Refueling Hose (without helix)
Product NameType HD-C
Part NumberHD-C
Short DescriptionAircraft Refueling Hose (without helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationHydrant inlet and into-plane hose. Up to size 2½" as deck hose. The hose does not kink with a permanent pressure of least 0,5 bar.
CommentSpecification: Meets Standard EN ISO 1825 (EN 1361), EI 1529 C, NFPA 407 and AS 2683. Approved acc. to German military standard VG 95 955. Specified by almost all major oil companies. Standard type 'HD-C' with two textile braids. Light weight, flexible hose for pressure service. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow bands every 4 mtr. and continuous embossing
Please note: Marking of HD 10 C with longitudinal yellow stripe.
Marking Sample

ELAFLEX HD 100 C · EN ISO 1825 C · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 10 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 32 mm (1¼") NEON
Product NameID 32 mm (1¼") NEON
Part Number32 NEON
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingFlange
Please Note:
For the correct choice of coupling and sealing materials please refer to our
Chemical Resistance Chart Fittings and Chemical Resistance Seals.

If in doubt, please contact our sales team.
Click to Compare
Last Update: 12.12.2019