Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select hose side 1: Coupling (Flange)
1
Hose Type: Lilac Band (CHD / CHS)
Product NameLilac Band (CHD / CHS)
DescriptionChemical hoses according to EN 12115 for over 75% of all industrial chemicals.
Lining: EPDM
2
Hose Type: Type CHS – Chemical Hose for suction + discharge (with steel helix)
Product NameType CHS
Part NumberCHS
Short DescriptionChemical Hose for suction + discharge (with steel helix)
Description'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.
Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.
ApplicationHighly flexible hose for more than 75 % of all industrial chemicals. Limits regarding medium, concentration, temperature see resistance chart. Electrically conductive connection via tube or cover without metallic contact. Meets EN 12115.
LiningEPDM, black, smooth, seamless, el. conductive
ReinforcementsTextile braids additionally with galvanised steel helix
CoverEPDM, conductive, resistant against ozone
MarkingLilac bands every 1,0 mtr. and continuous, vulcanised embossed stamping
Marking Sample

ELAFLEX CHS 50 · EN 12115 EPDM · SD · Ω /T · CHEMICALS · 16 BAR · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 150
Product Sheet
Page 117-118
2
Size (ID): ID 63 mm (2 ½")
Product NameID 63 mm (2 ½")
Part Number63
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Fixed or swiveling flange
Product NameFlanges
Short DescriptionFixed or swiveling flange
5
Coupling 1: Flange
5
Coupling Type 1
Form S (swiveling flange)swiveling flange

Form F (fixed flange)fixed flange
DIN PN 16
(PN 10, 16)
DIN PN 16 (PN 16, 40)

DIN PN 40
(PN 25, 40)
DIN PN 40 (PN 25, 40)

ASA 150ANSI B 16.5 150 lb/sq. in

ASA 300ANSI B 16.5 300 lb/sq. in
Steel Zn Cr PlatedSt

AluminiumAl

Stainless SteelSS

Stainless Steel PFA coatingSSE
Stainless steel, but parts in contact with liquid with an additional coating of Teflon® (FDA approved).
The PFA coating is used when the chemical resistance of stainlees steel is not sufficient like for hydrochloric acid, ferro-III-chloride, diluted sulfuric acid.

PolypropylenPP
Polypropylen mit StahlkernPP

Steel Zn Cr PlatedSt

AluminiumAl

Stainless SteelSS
SPANNFIXSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.


SPANNLOCSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

AluminiumStandard is hot stamped aluminium

Stainless Steelstainless steel
chosen option
selectable
non selectable
Matrix
5Coupling Type 2
6Part No.

Part Number

CHS 63 L1=m...

Hose TypeType CHS – Chemical Hose for suction + discharge (with steel helix)
Product NameType CHS
Part NumberCHS
Short DescriptionChemical Hose for suction + discharge (with steel helix)
Description'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.
Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.
ApplicationHighly flexible hose for more than 75 % of all industrial chemicals. Limits regarding medium, concentration, temperature see resistance chart. Electrically conductive connection via tube or cover without metallic contact. Meets EN 12115.
LiningEPDM, black, smooth, seamless, el. conductive
ReinforcementsTextile braids additionally with galvanised steel helix
CoverEPDM, conductive, resistant against ozone
MarkingLilac bands every 1,0 mtr. and continuous, vulcanised embossed stamping
Marking Sample

ELAFLEX CHS 50 · EN 12115 EPDM · SD · Ω /T · CHEMICALS · 16 BAR · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 150
Product Sheet
Page 117-118
Size (ID)ID 63 mm (2 ½")
Product NameID 63 mm (2 ½")
Part Number63
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingFlange
Please Note:
For the correct choice of coupling and sealing materials please refer to our
Chemical Resistance Chart Fittings and Chemical Resistance Seals.

If in doubt, please contact our sales team.
Click to Compare
Last Update: 12.12.2019