Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select hose side 1: Coupling (Threaded Couplings)
1
Hose Type: Lilac Band (CHD / CHS)
Product NameLilac Band (CHD / CHS)
DescriptionChemical hoses according to EN 12115 for over 75% of all industrial chemicals.
Lining: EPDM
2
Hose Type: Type CHS – Chemical Hose for suction + discharge (with steel helix)
Product NameType CHS
Part NumberCHS
Short DescriptionChemical Hose for suction + discharge (with steel helix)
Description'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.
Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.
ApplicationHighly flexible hose for more than 75 % of all industrial chemicals. Limits regarding medium, concentration, temperature see resistance chart. Electrically conductive connection via tube or cover without metallic contact. Meets EN 12115.
LiningEPDM, black, smooth, seamless, el. conductive
ReinforcementsTextile braids additionally with galvanised steel helix
CoverEPDM, conductive, resistant against ozone
MarkingLilac bands every 1,0 mtr. and continuous, vulcanised embossed stamping
Marking Sample

ELAFLEX CHS 50 · EN 12115 EPDM · SD · Ω /T · CHEMICALS · 16 BAR · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 150
Product Sheet
Page 117-118
2
Size (ID): ID 32 mm (1¼")
Product NameID 32 mm (1¼")
Part Number32
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Female / Male couplings
Product NameThreaded Couplings
Short DescriptionFemale / Male couplings
5
Coupling 1: Threaded Couplings
5
Coupling Type 1
BSPAccording to EN ISO 228 / BSP parallel.

NPSHASME B 1.20.7

NPTANSI B 1.20.1
Tapered pipe thread, thread seling e.g. with PTFE tape, therefore not available with swiveling nut, only as fixed female thread.

RD 58 X 1/6Hose couplings with special thread to DIN 11851 for foodstuffs.
BrassMs

Steel Zn Cr PlatedSt

Stainless SteelSS

Stainless Steel PFA coatingSSE
Stainless steel, but parts in contact with liquid with an additional coating of Teflon® (FDA approved).
The PFA coating is used when the chemical resistance of stainlees steel is not sufficient like for hydrochloric acid, ferro-III-chloride, diluted sulfuric acid.
SPANNFIXSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.


SPANNLOCSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

AluminiumStandard is hot stamped aluminium

Stainless Steelstainless steel
EPDMshort name: EPD
black, soft, for esters and ketones, ether, acetates, alkohols, aldehydes

FKMshort name: ViD
soft, for aromatic hydrocarbons and hot oils

Thermopacshort name: HBD
light colour, hard
Especially for hot oils and hot bitumen up to 250° C and for hot water and saturated steam up to 25 bar.

PTFEshort name: TD
white, solid, hard, glass fibre reinforced

Polyurethaneshort name: VD
Highly resistant to abrasion, non-toxic. Shore hardness = 90° C.
For all petroleum based products and many solvents as per resistance chart on page 396.

CSMShort name: HyD
soft, for acids and alkalis
chosen option
selectable
non selectable
Matrix
5Coupling Type 2
6Part No.

Part Number

CHS 32 L1=m...

Hose TypeType CHS – Chemical Hose for suction + discharge (with steel helix)
Product NameType CHS
Part NumberCHS
Short DescriptionChemical Hose for suction + discharge (with steel helix)
Description'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.
Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.
ApplicationHighly flexible hose for more than 75 % of all industrial chemicals. Limits regarding medium, concentration, temperature see resistance chart. Electrically conductive connection via tube or cover without metallic contact. Meets EN 12115.
LiningEPDM, black, smooth, seamless, el. conductive
ReinforcementsTextile braids additionally with galvanised steel helix
CoverEPDM, conductive, resistant against ozone
MarkingLilac bands every 1,0 mtr. and continuous, vulcanised embossed stamping
Marking Sample

ELAFLEX CHS 50 · EN 12115 EPDM · SD · Ω /T · CHEMICALS · 16 BAR · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 150
Product Sheet
Page 117-118
Size (ID)ID 32 mm (1¼")
Product NameID 32 mm (1¼")
Part Number32
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingThreaded Couplings
Please Note:
For the correct choice of coupling and sealing materials please refer to our
Chemical Resistance Chart Fittings and Chemical Resistance Seals.

If in doubt, please contact our sales team.
Click to Compare
Last Update: 12.12.2019