Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select: Coupling Type 2 hose side 2: Coupling
1
Hose Type: Yellow Band
Product NameYellow Band
DescriptionFuelling hoses for petroleum based products, aircraft and marine fuelling hoses.
Lining: NBR
2
Hose Type: Type TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 75 mm (3")
Product NameID 75 mm (3")
Part NumberTW 75 E
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Female / Male couplings
Product NameThreaded Couplings
Short DescriptionFemale / Male couplings
5
Coupling 1: Threaded Couplings
5
Coupling Type 1: MC 75-3" Ms Sn
Product NameMC 75-3" Ms Sn
DescriptionHose couplings with female thread to EN 14420-5 with reusable SPANNLOC bolted clamps of . Bolts and nuts steel, zinc plated and chromated.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
MaterialHose end fittings as tin plated ("Sn") version.
Product Sheet
Page 227-228
5
Accessories 1: Without
5
Coupling Type 2
6Part No.

Note: Components not true to scale. Picture may differ from original product.

Part Number

TW 75 E L1=m MC 75-3" Ms Sn ...

Hose TypeType TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 75 mm (3")
Product NameID 75 mm (3")
Part NumberTW 75 E
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingThreaded Couplings
Coupling TypeMC 75-3" Ms Sn
Product NameMC 75-3" Ms Sn
DescriptionHose couplings with female thread to EN 14420-5 with reusable SPANNLOC bolted clamps of . Bolts and nuts steel, zinc plated and chromated.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
MaterialHose end fittings as tin plated ("Sn") version.
Product Sheet
Page 227-228
Coupling MaterialBrass Tin Plated
Product NameBrass Tin Plated
DescriptionHose end fittings as tin plated ("Sn") version.
Thread SealPolyurethane
Product NamePolyurethane
Descriptionshort name: VD
Highly resistant to abrasion, non-toxic. Shore hardness = 90° C.
For all petroleum based products and many solvents as per resistance chart on page 396.
ClampSPANNLOC
Product NameSPANNLOC
DescriptionSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

AccessoriesWithout
Last Update: 01.04.2020