Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select hose side 1: Coupling (TW hose couplings to EN 14420-6)
1
Hose Type: Yellow Band
Product NameYellow Band
DescriptionFuelling hoses for petroleum based products, aircraft and marine fuelling hoses.
Lining: NBR
2
Hose Type: Type TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 32 mm (1¼")
Product NameID 32 mm (1¼")
Part Number32
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: TW-, Storz-, Camlock-, Guillemin-, Dry Connect Couplings
Product NameQuick Couplings
Short DescriptionTW-, Storz-, Camlock-, Guillemin-, Dry Connect Couplings
5
Coupling 1: TW hose couplings to EN 14420-6
Product NameTW hose couplings to EN 14420-6
DescriptionTW hose couplings, one or two piece construction, with SPANNLOC or SPANNLOC clamps.
Working pressure up to 16 bar.
Product Sheet
TW hose couplings with SPANNFIX - Page 241-242
TW hose couplings with SPANNLOC - Page 243-244
TW hose couplings stainless steel with SPANNFIX - Page 249-250
TW hose couplings stainless steel with SPANNLOC - Page 251-252
5
Coupling Type 1
Two-Piecetwo piece coupler joined by BSP threading with capative seal
Advantage: Wear part can be replaced seperately.
Stainless SteelSS
SPANNFIXSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.


SPANNLOCSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.


SPANNFIX N-RSPANNFIX N-R (non reattachable) works to the same principle as the SPANNFIX but cannot be disassembled without destroying the clamp.
Hose assemblies should be mounted only by experienced staff in the factory. Approved as equivalent to swaged-on and machine-fitted couplings.
EPDMshort name: EPD
black, soft, for esters and ketones, ether, acetates, alkohols, aldehydes

FKMshort name: ViD
soft, for aromatic hydrocarbons and hot oils

Thermopacshort name: HBD
light colour, hard
Especially for hot oils and hot bitumen up to 250° C and for hot water and saturated steam up to 25 bar.

PTFEshort name: TD
white, solid, hard, glass fibre reinforced

Polyurethaneshort name: VD
Highly resistant to abrasion, non-toxic. Shore hardness = 90° C.
For all petroleum based products and many solvents as per resistance chart on page 396.

CSMShort name: HyD
soft, for acids and alkalis
GSDSpecial design GSD 50 and GSD 80 for pressure and high suction serivce.

TWDStandard design TWD 50 and TWD 80 acc. EN 14420-6.
For normal suction / pressure operation.

CSMShort name: Hy
dark green / light green, for acids and alkalis

NBR whiteshort name: W
white, for foodstuffs

Polyurethaneshort name: PU
amber colour

FKMshort name: Vi
black, for aromatics and hot oils

EPDMshort name: EP
black, for esters and ketones

NBRshort name: NBR
for mineral oil products

NBR / PTFEshort name: TM
NBR core, PTFE encapsulated

PTFEshort name: TD
white, solid, continuously hard

CSMShort name: Hy
dark green / light green, for acids and alkalis

NBRshort name: NBR
black, for mineral oil products

Polyurethaneshort name: PU
blue, for mineral oil products and many solvents

FKMshort name: Vi
black, for aromatics and hot oils
chosen option
selectable
non selectable
Matrix
5Coupling Type 2
6Part No.

Part Number

TW-E 32 L1=m...

Hose TypeType TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 32 mm (1¼")
Product NameID 32 mm (1¼")
Part Number32
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingTW hose couplings to EN 14420-6
Product NameTW hose couplings to EN 14420-6
DescriptionTW hose couplings, one or two piece construction, with SPANNLOC or SPANNLOC clamps.
Working pressure up to 16 bar.
Product Sheet
TW hose couplings with SPANNFIX - Page 241-242
TW hose couplings with SPANNLOC - Page 243-244
TW hose couplings stainless steel with SPANNFIX - Page 249-250
TW hose couplings stainless steel with SPANNLOC - Page 251-252
Please Note:
For the correct choice of coupling and sealing materials please refer to our
Chemical Resistance Chart Fittings and Chemical Resistance Seals.

If in doubt, please contact our sales team.
Click to Compare
Last Update: 01.04.2020