Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select: Coupling Type 2 hose side 2: Coupling
1
Hose Type: Yellow Band
Product NameYellow Band
DescriptionFuelling hoses for petroleum based products, aircraft and marine fuelling hoses.
Lining: NBR
2
Hose Type: Type TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 32 mm (1¼")
Product NameID 32 mm (1¼")
Part Number32
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: TW-, Storz-, Camlock-, Guillemin-, Dry Connect Couplings
Product NameQuick Couplings
Short DescriptionTW-, Storz-, Camlock-, Guillemin-, Dry Connect Couplings
5
Coupling 1: Cam locking hose couplings to EN 14420-7
Product NameCam locking hose couplings to EN 14420-7
DescriptionCamlock hose couplings with SPANNFIX or SPANNLOC clamps.
Working pressure up to 16 bar (DN 100 up to 10 bar).
Product Sheet
Page 255-258
5
Coupling Type 1: AMKX 32 SS/NR
Product NameAMKX 32 SS/NR
Description'Camlock' hose couplings with SPANNFIX N-R embedding of , non-reattachable.
Working pressure up to 16 bar.
Female coupler and hose tail.

One-piece construction without thread connection.
SealCoupler seal AKD of CSM*.
*Further materials available. Overview coupler seals see page 395.
MaterialFemale coupler and hose tail, of stainless steel AISI 316.
Product Sheet
Seite 255-258
5
Accessories 1: K 200 DIN (brass)
Product NameK 200 DIN (brass)
DescriptionChains with hardened S-hooks. Heavy type according to DIN 80402. Chain of brass, S-hooks of stainless steel.
Length 200 mm - assembled.
Product Sheet
Seite 311-312
5
Coupling Type 2
6Part No.
K 200 DIN (brass)

Note: Components not true to scale. Picture may differ from original product.

Part Number

TW-E 32 L1=m AMKX 32 SS/NR + K 200 DIN (brass) ...

Hose TypeType TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 32 mm (1¼")
Product NameID 32 mm (1¼")
Part Number32
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingCam locking hose couplings to EN 14420-7
Product NameCam locking hose couplings to EN 14420-7
DescriptionCamlock hose couplings with SPANNFIX or SPANNLOC clamps.
Working pressure up to 16 bar (DN 100 up to 10 bar).
Product Sheet
Page 255-258
Coupling TypeAMKX 32 SS/NR
Product NameAMKX 32 SS/NR
Description'Camlock' hose couplings with SPANNFIX N-R embedding of , non-reattachable.
Working pressure up to 16 bar.
Female coupler and hose tail.

One-piece construction without thread connection.
SealCoupler seal AKD of CSM*.
*Further materials available. Overview coupler seals see page 395.
MaterialFemale coupler and hose tail, of stainless steel AISI 316.
Product Sheet
Seite 255-258
Coupling MaterialStainless Steel
Product NameStainless Steel
DescriptionFemale coupler and hose tail, of stainless steel AISI 316.
Coupling Seal MaterialCSM
ClampSPANNFIX N-R
Product NameSPANNFIX N-R
DescriptionSPANNFIX N-R (non reattachable) works to the same principle as the SPANNFIX but cannot be disassembled without destroying the clamp.
Hose assemblies should be mounted only by experienced staff in the factory. Approved as equivalent to swaged-on and machine-fitted couplings.
AccessoriesK 200 DIN (brass)
Product NameK 200 DIN (brass)
DescriptionChains with hardened S-hooks. Heavy type according to DIN 80402. Chain of brass, S-hooks of stainless steel.
Length 200 mm - assembled.
Product Sheet
Seite 311-312
Last Update: 04.12.2019