Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select: Accessories 1
1
Hose Type: Yellow Band
Product NameYellow Band
DescriptionFuelling hoses for petroleum based products, aircraft and marine fuelling hoses.
Lining: NBR
2
Hose Type: Type TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 32 mm (1¼")
Product NameID 32 mm (1¼")
Part Number32
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: TW-, Storz-, Camlock-, Guillemin-, Dry Connect Couplings
Product NameQuick Couplings
Short DescriptionTW-, Storz-, Camlock-, Guillemin-, Dry Connect Couplings
5
Coupling 1: Cam locking hose couplings to EN 14420-7
Product NameCam locking hose couplings to EN 14420-7
DescriptionCamlock hose couplings with SPANNFIX or SPANNLOC clamps.
Working pressure up to 16 bar (DN 100 up to 10 bar).
Product Sheet
Page 255-258
5
Coupling Type 1: AMKX 32.32 SS
Product NameAMKX 32.32 SS
Description'Camlock' hose couplings to EN 14420-7 with SPANNFIX clamps of .
Working pressure up to 16 bar.
Female coupler.

Two-piece construction, joined by BSP threading.
SealCoupler seal AKD of CSM*.
*Further materials available. Overview coupler seals see page 395.
MaterialFemale coupler and hose tail, of stainless steel AISI 316.
Thread MaterialMale fitting of stainless steel.
Product Sheet
Seite 341-344
5
Accessories 1
Without
AVB 32 Ms (hot stamped brass)
Additional Info

'Camlock' dust plug type AVB to EN 14420-7 of hot stamped brass, for 'Camlock' couplers AMK. Working pressure up to 16 bar.
Chains to be ordered separately.

AVB 32 SSE (stainless steel PFA coating)
Additional Info

'Camlock' dust plug type AVB to EN 14420-7 of stainless steel with PFA coating, for 'Camlock' couplers AMK. Working pressure up to 16 bar.
Chains to be ordered separately.

AVB 32 SS (stainless steel AISI 316)
Additional Info

'Camlock' dust plug type AVB to EN 14420-7 of stainless steel, for 'Camlock' couplers AMK. Working pressure up to 16 bar.
Chains to be ordered separately.

AVB 32 Al (hot stamped aluminium)
Additional Info

'Camlock' dust plug type AVB to EN 14420-7 of hot stamped aluminium, for 'Camlock' couplers AMK. Working pressure up to 16 bar.
Chains to be ordered separately.

K 200 DIN (brass)
Additional Info

Chains with hardened S-hooks. Heavy type according to DIN 80402. Chain of brass, S-hooks of stainless steel.
Length 200 mm - assembled.

K 200 SS (stainless steel)
Additional Info

Chains with hardened S-hooks. Heavy type for chemical industry. Chain and S-hooks of stainless steel.
Length 200 mm - assembled.

5Coupling Type 2
6Part No.

Part Number

TW-E 32 L1=m AMKX 32.32 SS ...

Hose TypeType TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 32 mm (1¼")
Product NameID 32 mm (1¼")
Part Number32
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingCam locking hose couplings to EN 14420-7
Product NameCam locking hose couplings to EN 14420-7
DescriptionCamlock hose couplings with SPANNFIX or SPANNLOC clamps.
Working pressure up to 16 bar (DN 100 up to 10 bar).
Product Sheet
Page 255-258
Coupling TypeAMKX 32.32 SS
Product NameAMKX 32.32 SS
Description'Camlock' hose couplings to EN 14420-7 with SPANNFIX clamps of .
Working pressure up to 16 bar.
Female coupler.

Two-piece construction, joined by BSP threading.
SealCoupler seal AKD of CSM*.
*Further materials available. Overview coupler seals see page 395.
MaterialFemale coupler and hose tail, of stainless steel AISI 316.
Thread MaterialMale fitting of stainless steel.
Product Sheet
Seite 341-344
Coupling MaterialStainless Steel
Product NameStainless Steel
DescriptionFemale coupler and hose tail, of stainless steel AISI 316.
Thread SealPTFE
Product NamePTFE
Descriptionshort name: TD
white, solid, hard, glass fibre reinforced
Coupling Seal MaterialCSM
ClampSPANNFIX
Product NameSPANNFIX
DescriptionSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.

Click to Compare
Your choice:
Choose additional options
or click here to go on.
Last Update: 21.11.2019