Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select: Coupling Type 2 hose side 2: Coupling
1
Hose Type: Yellow Band
Product NameYellow Band
DescriptionFuelling hoses for petroleum based products, aircraft and marine fuelling hoses.
Lining: NBR
2
Hose Type: Type TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 100 mm (4")
Product NameID 100 mm (4")
Part NumberTW 100 E
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Female / Male couplings
Product NameThreaded Couplings
Short DescriptionFemale / Male couplings
5
Coupling 1: Threaded Couplings
5
Coupling Type 1: VC 100-4" NPT Ms Sn
Product NameVC 100-4" NPT Ms Sn
DescriptionHose couplings with male thread to EN 14420-5 with reusable SPANNLOC bolted clamps of . Bolts and nuts steel, zinc plated and chromated.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
MaterialHose end fittings as tin plated ("Sn") version.
Product Sheet
Seite 229-230
5
Accessories 1: Without
5
Coupling Type 2
6Part No.

Note: Components not true to scale. Picture may differ from original product.

Part Number

TW 100 E L1=m VC 100-4" NPT Ms Sn ...

Hose TypeType TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 100 mm (4")
Product NameID 100 mm (4")
Part NumberTW 100 E
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingThreaded Couplings
Coupling TypeVC 100-4" NPT Ms Sn
Product NameVC 100-4" NPT Ms Sn
DescriptionHose couplings with male thread to EN 14420-5 with reusable SPANNLOC bolted clamps of . Bolts and nuts steel, zinc plated and chromated.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
MaterialHose end fittings as tin plated ("Sn") version.
Product Sheet
Seite 229-230
Coupling MaterialBrass Tin Plated
Product NameBrass Tin Plated
DescriptionHose end fittings as tin plated ("Sn") version.
ClampSPANNLOC
Product NameSPANNLOC
DescriptionSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

AccessoriesWithout
Last Update: 18.02.2020