Select: Part No.
1
Hose Type: Yellow Band
Product NameYellow Band
DescriptionFuelling hoses for petroleum based products, aircraft and marine fuelling hoses.
Lining: NBR
2
Hose Type: Type TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 100 mm (4")
Product NameID 100 mm (4")
Part NumberTW 100 E
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Female / Male couplings
Product NameThreaded Couplings
Short DescriptionFemale / Male couplings
5
Coupling 1: Threaded Couplings
5
Coupling Type 1: MX 100-5 1/2" SS
Product NameMX 100-5 1/2" SS
DescriptionHose couplings with female thread to EN 14420-5 with re-usable SPANNFIX pinned safety clamps of .
Pins of stainless steel.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
SealSeal of PTFE.
MaterialHose tail of AISI 316 Ti (AISI 316). Union nut of AISI 316, AISI 316 Ti or AISI 304.
Product Sheet
Page 221-222
5
Accessories 1: Without
5
Coupling Type 2: Female / Male couplings
Product NameThreaded Couplings
Short DescriptionFemale / Male couplings
6
Coupling 2: Threaded Couplings
6
Coupling Type 2: MX 100-5 1/2" SS
Product NameMX 100-5 1/2" SS
DescriptionHose couplings with female thread to EN 14420-5 with re-usable SPANNFIX pinned safety clamps of .
Pins of stainless steel.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
SealSeal of PTFE.
MaterialHose tail of AISI 316 Ti (AISI 316). Union nut of AISI 316, AISI 316 Ti or AISI 304.
Product Sheet
Page 221-222
6
Accessories 2: Without
6
Part No.
Request for Quotation



* required field




PDF-Documents

Note: Components not true to scale. Picture may differ from original product.

Part Number

TW 100 E L1=m MX 100-5 1/2" SS | MX 100-5 1/2" SS ...

Hose TypeType TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 100 mm (4")
Product NameID 100 mm (4")
Part NumberTW 100 E
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One SideHose End Fitting Other Side
CouplingThreaded CouplingsThreaded Couplings
Coupling TypeMX 100-5 1/2" SS
Product NameMX 100-5 1/2" SS
DescriptionHose couplings with female thread to EN 14420-5 with re-usable SPANNFIX pinned safety clamps of .
Pins of stainless steel.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
SealSeal of PTFE.
MaterialHose tail of AISI 316 Ti (AISI 316). Union nut of AISI 316, AISI 316 Ti or AISI 304.
Product Sheet
Page 221-222
MX 100-5 1/2" SS
Product NameMX 100-5 1/2" SS
DescriptionHose couplings with female thread to EN 14420-5 with re-usable SPANNFIX pinned safety clamps of .
Pins of stainless steel.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
SealSeal of PTFE.
MaterialHose tail of AISI 316 Ti (AISI 316). Union nut of AISI 316, AISI 316 Ti or AISI 304.
Product Sheet
Page 221-222
Coupling MaterialStainless Steel
Product NameStainless Steel
DescriptionHose tail of AISI 316 Ti (AISI 316). Union nut of AISI 316, AISI 316 Ti or AISI 304.
Stainless Steel
Product NameStainless Steel
DescriptionHose tail of AISI 316 Ti (AISI 316). Union nut of AISI 316, AISI 316 Ti or AISI 304.
Thread SealPTFE
Product NamePTFE
Descriptionshort name: TD
white, solid, hard, glass fibre reinforced
PTFE
Product NamePTFE
Descriptionshort name: TD
white, solid, hard, glass fibre reinforced
ClampSPANNFIX
Product NameSPANNFIX
DescriptionSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.

SPANNFIX
Product NameSPANNFIX
DescriptionSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.

AccessoriesWithoutWithout
Last Update: 27.03.2020