Select hose side 2: Coupling (Flange)
1
Hose Type: Yellow Band
Product NameYellow Band
DescriptionFuelling hoses for petroleum based products, aircraft and marine fuelling hoses.
Lining: NBR
2
Hose Type: Type TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID): ID 100 mm (4")
Product NameID 100 mm (4")
Part NumberTW 100 E
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Coupling Type 1: Female / Male couplings
Product NameThreaded Couplings
Short DescriptionFemale / Male couplings
5
Coupling 1: Threaded Couplings
5
Coupling Type 1: MC 100-5 1/2" L
Product NameMC 100-5 1/2" L
DescriptionHose couplings with female thread to EN 14420-5 with reusable SPANNLOC bolted clamps of . Bolts and nuts steel, zinc plated and chromated.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
MaterialL-Type (PN 10): Hose tail aluminium, union nut of brass.
Product Sheet
Page 227-228
5
Accessories 1: Without
5
Coupling Type 2: Fixed or swiveling flange
Product NameFlanges
Short DescriptionFixed or swiveling flange
6
Coupling 2: Flange
6
Coupling Type 2
Form F (fixed flange)fixed flange

Form S (swiveling flange)swiveling flange
DIN PN 40
(PN 25, 40)
DIN PN 40 (PN 25, 40)

DIN PN 16
(PN 10, 16)
DIN PN 16 (PN 16, 40)

ASA 300ANSI B 16.5 300 lb/sq. in

ASA 150ANSI B 16.5 150 lb/sq. in
Stainless SteelSS

AluminiumAl
Steel Zn Cr PlatedSt

Stainless SteelSS

AluminiumAl
SPANNLOCSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.


SPANNFIX N-RSPANNFIX N-R (non reattachable) works to the same principle as the SPANNFIX but cannot be disassembled without destroying the clamp.
Hose assemblies should be mounted only by experienced staff in the factory. Approved as equivalent to swaged-on and machine-fitted couplings.

SPANNFIXSafety pinned clamps.
Only for hoses with acceptable wall thickness.

Simple assembling without special tools in a vice (see assembly hints on page 222).
Completely safe attachment by stainless steel pin.
Disassembling only possible in a vice.

chosen option
selectable
non selectable
Matrix
6Part No.

Part Number

TW 100 E L1=m MC 100-5 1/2" L ...

Hose TypeType TW-E – Aviation Refuelling Hose (with steel helix)
Product NameType TW-E
Part NumberTW-E
Short DescriptionAviation Refuelling Hose (with steel helix)
Description'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.
ApplicationFor tank trucks and the connection between truck and trailer as well as riser systems (see overleaf).
Not approved for hydrant inlet and into-plane fuelling.
CommentSuction-/discharge hard wall hose with galvanised steel helix for high suction and for gravity discharge. Burst pressure >80 bar / 1200 psi.
LiningNitrile rubber (NBR), antistatic, no fuel solubility
ReinforcementsTextile braids without metallic strands
CoverChloroprene (CR), conductive, ozone and flame resistant, highly abrasion resistant
CertificatesDNV • GL - type examination certificate for aviation refuelling hoses.
MarkingYellow band every 4 mtr. and continuous embossing
Marking Sample

ELAFLEX TW 100 E · EN ISO 1825 E · 20 BAR · EN 1361 C · EN 12115 NBR 1 · D · Ω/T · EN 1761 · EI 1529 C · VG 95 955 D · AS 2683 · Ω · PN 20 · · ContiTech · MADE IN GERMANY · 1Q-17

SizeDN 25 to DN 100
Product Sheet
Page 107-108
PDF Certificates
DNV • GL - type examination certificate
Size (ID)ID 100 mm (4")
Product NameID 100 mm (4")
Part NumberTW 100 E
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One SideHose End Fitting Other Side
CouplingThreaded CouplingsFlange
Coupling TypeMC 100-5 1/2" L
Product NameMC 100-5 1/2" L
DescriptionHose couplings with female thread to EN 14420-5 with reusable SPANNLOC bolted clamps of . Bolts and nuts steel, zinc plated and chromated.
Working pressure up to 25 bar.
Chemical resistance chart see page 250.
MaterialL-Type (PN 10): Hose tail aluminium, union nut of brass.
Product Sheet
Page 227-228
Coupling MaterialL-TYPE
Product NameL-TYPE
DescriptionL-Type (PN 10): Hose tail aluminium, union nut of brass.
Thread SealPolyurethane
Product NamePolyurethane
Descriptionshort name: VD
Highly resistant to abrasion, non-toxic. Shore hardness = 90° C.
For all petroleum based products and many solvents as per resistance chart on page 396.
ClampSPANNLOC
Product NameSPANNLOC
DescriptionSafety pinned clamps.
Suitable also for hoses with varying or slightly greater wall thickness.

Assembling with hexagonal spanner on site possible.
Bolts and nuts of zinc-plated and chromated steel.
Re-tightening possible.
Simple disassembly.

AccessoriesWithout
Please Note:
For the correct choice of coupling and sealing materials please refer to our
Chemical Resistance Chart Fittings and Chemical Resistance Seals.

If in doubt, please contact our sales team.
Click to Compare
Last Update: 27.03.2020