Configurator Hose Assemblies

HomeBack to Start
DE | EN
Select: Size (ID) (inner diameter)
1
Hose Type: Yellow Band
Product NameYellow Band
DescriptionFuelling hoses for petroleum based products, aircraft and marine fuelling hoses.
Lining: NBR
2
Hose Type: Type LTW – Light Weight Tank Truck Hose (with steel helix)
Product NameType LTW
Part NumberLTW
Short DescriptionLight Weight Tank Truck Hose (with steel helix)
Description'Yellow Band' light weight tank truck hose with smooth bore and with corrugated cover. Easy to handle due to high flexibility. Same material, range of application and the yellow bands as type TW.
CommentThe tube is resistant to swelling and diffusion, does not stiffen and is flexible at low temperatures. However, the hose tube is sensitive to ozone. Therefore unused hoses must be stored with capped ends. The cover is very resistant to abrasion and weather. Meets the material group NBR 1 of EN 12115. Other dimensions (i.e. 63, 125, 150) on request. Type LTW meets EN 1761 with a nominal pressure of 10 bar and a minimum burst pressure of 40 bar. Due to the elongation of the flexible construction only apply the usual filling pressure up to maximum 6 of bar for pressure operation.
LiningNBR, conductive, black, no fuel solubility
ReinforcementsTextile braids and embedded non-kinking galvanised steel helix in the conductive layer
CoverChloroprene (CR) black, conductive
CertificatesDNV • GL - type examination certificate for fuelling hoses.
MarkingYellow bands every 2,5 mtr. and continous embossing
Marking Sample

ELAFLEX LTW 50 · EN 1761 · NBR · SD · Ω · 10 BAR · ELAFLEX GERMANY ·  · 2Q-17

SizeDN 50 to DN 100
Product Sheet
Page 105-106
PDF Certificates
DNV • GL - type examination certificate
2
Size (ID)
3Length (L1)
4Coupling Type 1
5Coupling Type 2
6Part No.

Part Number

LTW...

Hose TypeType LTW – Light Weight Tank Truck Hose (with steel helix)
Product NameType LTW
Part NumberLTW
Short DescriptionLight Weight Tank Truck Hose (with steel helix)
Description'Yellow Band' light weight tank truck hose with smooth bore and with corrugated cover. Easy to handle due to high flexibility. Same material, range of application and the yellow bands as type TW.
CommentThe tube is resistant to swelling and diffusion, does not stiffen and is flexible at low temperatures. However, the hose tube is sensitive to ozone. Therefore unused hoses must be stored with capped ends. The cover is very resistant to abrasion and weather. Meets the material group NBR 1 of EN 12115. Other dimensions (i.e. 63, 125, 150) on request. Type LTW meets EN 1761 with a nominal pressure of 10 bar and a minimum burst pressure of 40 bar. Due to the elongation of the flexible construction only apply the usual filling pressure up to maximum 6 of bar for pressure operation.
LiningNBR, conductive, black, no fuel solubility
ReinforcementsTextile braids and embedded non-kinking galvanised steel helix in the conductive layer
CoverChloroprene (CR) black, conductive
CertificatesDNV • GL - type examination certificate for fuelling hoses.
MarkingYellow bands every 2,5 mtr. and continous embossing
Marking Sample

ELAFLEX LTW 50 · EN 1761 · NBR · SD · Ω · 10 BAR · ELAFLEX GERMANY ·  · 2Q-17

SizeDN 50 to DN 100
Product Sheet
Page 105-106
PDF Certificates
DNV • GL - type examination certificate
Click to Compare
Your choice:
Choose additional options
or click here to go on.
Last Update: 10.12.2019